Grizzly G0464 - Manual (Page 7)

Model G0464/G0465/G0467/G0468/G0470 Air Compressors - 5
-
7. KEEP CHILDREN AND VISITORS
AWAY. Keep all children and visitors
a safe distance from the work area.
8. MAKE WORKSHOP CHILD PROOF.
Use padlocks, master switches, and
remove start switch keys. Shut off air
supply before leaving shop.
9. NEVER LEAVE UNATTENDED
TOOL CONNECTED TO AIR. DO
NOT leave before relieving the tool
of air pressure and disconnecting it
from the air hose.
10. DO NOT USE IN DANGEROUS
ENVIRONMENTS. DO NOT use in
damp, wet locations, or where flam-
mable or noxious fumes may exist.
11. KEEP WORK AREA CLEAN AND
WELL LIT. Clutter and dark shad-
ows may cause accidents.
12. USE A GROUNDED EXTENSION
CORD RATED FOR THE MACHINE
AMPERAGE. Undersized cords
overheat and lose power. Replace
extension cords if they become dam-
aged. DO NOT use extension cords
for 220V machinery.
13. ONLY ALLOW TRAINED AND
PROPERLY SUPERVISED PER-
SONNEL TO OPERATE MACHIN-
ERY. Make sure operation instruc-
tions are safe and understood.
14. MAKE SURE GUARDS ARE IN
PLACE AND WORK CORRECTLY
BEFORE USING MACHINERY.
15. CHECK FOR DAMAGED PARTS
BEFORE USING MACHINERY.
Check for binding and alignment of
parts, broken parts, part mounting,
loose bolts, and any other conditions
that may affect machine operation.
Repair or replace damaged parts.
16. REMOVE ADJUSTING KEYS AND
WRENCHES. Make a habit of check-
ing for keys and adjusting wrenches
before turning machinery
ON.
17. REDUCE THE RISK OF
UNINTENTIONAL FIRING. DO NOT
carry tool with hand on trigger and
disconnect from air when not in use.
18. USE PROPER AIR HOSE for the
tool. Make sure your air hose is in
good condition and is long enough to
reach your work without stretching.
19. DO NOT FORCE MACHINERY. Work
at the speed for which the machine
or accessory was designed.
20. DO NOT OVERREACH. Keep prop-
er footing and balance at all times.
21. SECURE WORKPIECE. Use clamps
or a vise to hold the workpiece when
practical. A secured workpiece pro-
tects your hands and frees both
hands to operate the tool.
22. USE SUGGESTED ACCESSORIES.
Refer to the instruction manual for
recommended accessories. The use
of improper accessories may cause
risk of injury.
23. MAINTAIN MACHINERY WITH
CARE. Keep tools lubricated and
clean for best and safest perfor-
mance. Follow instructions for lubri-
cating and changing accessories.
24. ALWAYS DISCONNECT FROM
POWER SOURCE BEFORE
SERVICING MACHINERY. Make
sure switch is in OFF position before
reconnecting.
25. DISCONNECT PNEUMATIC TOOLS
FROM COMPRESSOR. Always dis-
connect tools before servicing or
changing accessories.
26. BE AWARE THAT CERTAIN
WOODS MAY CAUSE ALLERGIC
REACTIONS IN PEOPLE AND
ANIMALS, ESPECIALLY WHEN
EXPOSED TO FINE DUST. Make
sure you know what type of wood
dust you will be exposed to and
always wear an approved respirator.