Safety, Before starting installation – Garmin GLADIATOR TR-1 User Manual

Page 3

Advertising
background image

You are responsible for the safe and prudent operation of

your vessel. Your TR-1 Autopilot is a tool that will enhance

your capability to operate your boat and catch fish. It does

not relieve you from the responsibility for safe operation

of your vessel. You must avoid hazards to navigation and

never leave the helm unattended.

You must always be prepared to promptly regain manual control of your

boat. The autopilot can fail and hard over.

Learn to operate your autopilot on calm and hazard free open water.

In case the autopilot becomes inoperable, remove the in line fuse from the

battery power cable.

If available, always use the engine kill lanyard when operating your boat.

Use caution when operating the autopilot at high speeds near hazards in the water, such as docks,

pilings or other boats.

Safety

Before Starting Installation

Study this manual and the other manuals provided with your autopilot

carefully, and familiarize yourself with all of the components and

their intended or required mounting locations. Ensure there is

adequate space available for installation before cutting or drilling

holes. Take extreme care when cutting and drilling, to avoid the

possibility of damaging other components in the boat, and avoid

possible personal injury. Be sure to follow the instructions carefully

and thoroughly. Nautamatic Marine Systems, Inc. cannot accept

reasonability for installations where the instructions have not been

followed, where substitute parts have been used, or modifications

have been made to our products.

Page 2

Advertising