Genesis I.C.E. 12t - Manual (Page 6)

6 66 6
~ДлздмнЙ=СбЗЙдбну™
Two Surround Subwoofers - 5.1 System
In a dual subwoofer 5.1-channel system, place one S2/12t in each
rear corner of the room, and connect the speaker-level inputs to the
nearest surround speaker thru connectors. Connect the LFE-input of
one S2/12t to the LFE/Subwoofer output of the processor, and its LFE-
output to the LFE-input of the other S2/12t. Several Genesis
loudspeakers and subwoofers can be daisy-chained in this manner.
Two Surround Subwoofers - 7.1 System
If you have a 7.1 system and two subwoofers, each S2/12t can be
used to augment BOTH the nearest surround as well as the rear
channel via the high-level inputs, as well as distribute LFE to both rear
corners of the room. Connect the high level thru from the surround
speaker to one set of high level inputs on the S2/12t and the high level
thru from the rear speaker to the other.