Garmin zumo 450 - Manual (Page 17)

GPSMAP 400/500 Series Owner’s Manual 
Using Charts
Navigating to a Point on the Chart
1. From the Home screen, select Charts .
2. Select Navigation Chart , Fishing Chart , or Split Navigation
Chart .
3. Use the Rocker to select the point on the chart to which you
want to go.
4. Press SELECT .
5. Select Navigate To .
6. Select Go To (or Guide To when using a preprogrammed
BlueChart g2 Vision card for Automatic Guidance).
7. Follow the colored line on the screen to the destination.
To create a route to a point on the chart, see page 25 .
Panning the Navigation Chart
Use the Rocker to move the map pointer ( ) away from your
current location and to scroll to other areas on the Navigation chart.
As you pan past the edge of the current map display, the screen
scrolls forward to provide continuous map coverage.
As you move the map pointer, you can view the distance and
bearing from your current location and the map pointer’s location
coordinates in the lower-right corner of the map.
To pan the map, press up, down, right, or left on the Rocker .
Map
pointer
To stop panning, press MENU , and then select Stop Panning .
Zooming In and Out on the Map
The Range (-/+) keys control the zoom level, indicated by the scale
at the bottom of the Navigation chart ( ). The bar under the
number represents that distance on the map.