GE 3-7025 - Manual (Page 4)

2
G
ETTING
S
TARTED
P
OWERING
U
P
You can power your GE portable stereo by plugging in the AC power cord,
or by inserting 6 D-sized batteries.
To insert the batteries:
1. Press down on the tabs and lift up to remove the battery compartment
door from the bottom of the unit.
2. Insert 6 D-sized batteries as shown in the diagram on the unit.
3. Replace the battery compartment door.
When you have the battery compartment door off, you might want to store
the cord inside to keep it out of the way while you’re using the batteries.
OR
Open the battery compartment door
and insert 6 D-sized batteries.
G
ENERAL
C
ONTROLS
It doesn’t matter whether you are using the radio, the tape player, or the
CD player, you need to know where these controls are:
• POWER (function) switch — Use to choose the function. By choosing
TAPE or DISC, you shut off power to the RADIO.
• VOLUME — Use to control the volume.
• TONE — Use to adjust the tone to your preferred listening level.
NOTE: If you’re not going to use the stereo
for more than a month, be sure to take the
batteries out, or it they might leak and cause
you all kinds of problems.
TONE
VOLUME
0
1
2
3 4 5 6 7
8
9
10
0
1
2
3
4 5 6 7
8
9
10
OPEN
POWER
RADIO
TAPE
DISC
COMPACT
DIGITAL AUDIO
Function switch
TONE
VOLUME
3-7025.e 10/25/96, 9:46 AM 2