Gateway 840 VT-100 - Manual (Page 108)

103
Modifying SAN LUN Mapping
www.gateway.com
Modifying SAN LUN Mapping
It is sometimes necessary to modify some or all of the parameters of a SAN LUN
Mapping. You can change the Mapping Name, Port Name, and the RAID controller
port availability access of the mapping.
This may be necessary if, for example, a host system has an adapter failure and a
new adapter with different Node and Port names (initiator ID for SCSI HBAs) is
installed.
To modify a SAN LUN mapping:
1
From the Main Menu, select the Configuration Menu , then press E NTER . The
Configuration Menu opens.