Grizzly H7943/H7944 - Manual (Page 6)

H7943 /H7944 Framing Nailer -4 -
INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H7943/H7944 framing nailer. This nailer
is part of a growing Grizzly family of fine
pneumatic tools. When used according to
the guidelines set forth in this manual, you
can expect years of trouble-free, enjoy-
able operation and proof of Grizzly’s com-
mitment to customer satisfaction.
The Model H7943/H7944 features a 360°
exhaust port and a comfort grip rubber
handle. It is also economical in air con-
sumption, able to fire 10-15 nails/second
when powered by a
3 /
4
" HP compressor.
The specifications, details, and photo-
graphs in this manual represent Model
H7943/H7944 as supplied when this
manual was prepared. However, owing
to Grizzly’s policy of continuous improve-
ment, changes may be made at any time
with no obligation on the part of Grizzly.
Foreword
Contact Info
Nail Type ..................................Roundhead
Nail Angle ..............................................21°
Nail Diameter .......................0.113" - 0.161"
Nail Length .........................................2"–4"
Magazine Capacity ........................ 66 Nails
Air Inlet ...........................................
3 /
8
" NPT
Weight ...........................................7.75 lbs.
Operating Pressure ................. 70–120 PSI
Nail Type ...............................Clipped Head
Nail Angle ..............................................34°
Nail Diameter .......................0.113" - 0.161"
Nail Length .........................................2"–4"
Magazine Capacity ........................ 90 Nails
Air Inlet ...........................................
3 /
8
" NPT
Weight ...........................................7.85 lbs.
Operating Pressure ................. 70–120 PSI
Model H7943
Specifications
Model H7944
Specifications