Garmin nuvi 465 - Manual (Page 45)

nüvi 465 owner’s manual 39
Appendix
Charging Your nüvi
Charge your nüvi for at least 4 hours
before using on battery power.
• Connect the vehicle power cable to
the mini-USB connector on your
nüvi and to a power outlet in your
vehicle. The vehicle key may need to
be turned to ON/ACC for the nüvi to
charge.
• Connect an AC adapter (optional
accessory) to the nüvi and a wall
outlet.
• Connect your nüvi to a computer
using the USB cable. The computer
must be on for the nüvi to charge.
Changing the Fuse
CAUtIoN: When replacing the fuse,
do not lose any of the small pieces
and make sure they are put back in the
proper place.
If your unit will not charge in your
vehicle, you might need to replace the
fuse located at the tip of the vehicle
adapter.
1. Unscrew the black,
round end piece,
and remove it.
2. Remove the fuse
(glass and silver
cylinder), and
replace it with a 1 A
fast‑blow fuse.
3. Ensure that the
silver tip is placed in the black end
piece. Screw on the black end piece.
Removing the nüvi and
Mount
To remove the nüvi from the cradle, hold
onto the cradle and tilt the nüvi forward.
To remove the cradle from the mount,
turn the cradle to the right or left. Apply
pressure in that direction until the cradle
snaps off the mount.
End
piece
Silver tip
Fuse