Great Dane Chariot GDRZ25KAE - Manual (Page 12)

Operating - 9
OPERATING
3. Depress and hold the mower deck lift/lower pedal (A)
and release the transport position lock lever (C).
4. Release the mower deck lift/lower pedal (A) and allow
the pedal to rest against the HOC pin.
Using the Fuel Shutoff Valve
MX9409
Move the fuel shutoff valve (A) to the on position for normal
operation. Move the valve to the off position when the
machine is not in use and during transport.
Moving the Machine Manually
1. Park machine safely. (See Parking Safely in the Safety
section.)
NOTE: The pumps are located under the machine,
behind the mower deck.
MX9226
Picture Note: Left pump shown.
2. Turn free-wheeling valves (A) on both pumps one full
turn counterclockwise (open position).
3. Unlock park brake.
4. Push machine to desired location. Due to internal
hydraulic system resistance, the machine will move slowly.
5. Turn free-wheeling valves (A) on both pumps one full
turn clockwise (closed position). Tighten the valves to 9-14
N•m (80-120 lb-in.).
6. Lock park brake.
c
CAUTION: Avoid injury! With the free-wheeling
valve open, the machine will have unrestricted
motion.
• The machine may free-wheel out of control if
the free-wheeling valve is opened with the
machine on an incline.
• Park the machine on a level surface before
opening the free-wheeling valve.
IMPORTANT: Avoid damage! Transmission damage
may occur if the machine is moved or towed
incorrectly:
• Move unit by hand only.
• Do not use another vehicle to move unit.
• Do not tow unit.
A
A