Gemini GEM-P800 - Manual (Page 4)

ARM
ED
&20387(5,=(' 6(&85,7< 6<67(0
STAT
US
 
 
G E M I N I
1 2 3 4 5 6 7 8



    



4
Keypad Controls and Indicators
Status Light will light when all zones are secure
and system is ready to be Armed.
AC Light will light to indicate
that AC Power is present.
Trouble Light  will light and the Keypad
sounder will pulse to indicate that a system trou-
ble is present. (See System troubles, Page 12)
Zone Lights (1 through 8) will light to indicate
that the corresponding Zone is open, and will
flash to indicate a zone in alarm.
Armed Light will light when system is Armed,
and will flash when system is in Alarm
Press  to reset Fire Zone, clear miss-
entered codes, reset Alarm Memory, etc.
Fire Alarm Light   will flash and the Keypad
sounder will beep when system is in a Fire Alarm
Condition (See Silencing a fire Alarm, Page 8)
Emergency Keys Press simultaneously
to signal an emergency condition.
Press  +  for Fire Emergency,
 +  for Auxiliary Emergency or
 +  for Police Emergency.
(Programmable)
To Bypass a zone, press  and the zone
number to be bypassed, and then Arm system.
Press  followed by the corresponding
Function number to enable special functions and
options. (See Special Functions, Page 11)
Numerical
Keys 1-9, 0.
Used to en-
ter User
Codes, Zone
numbers,
etc.
Press 
to bypass all
interior pro-
tective de-
vices such
as motion
sensors, etc.
Press 
to remove
entry delay
from the Exit/
Entry door.
Press

after entering
User Code
when Arming
or Disarming
System.
Oi219c
page 4 Tuesday, September 16, 1997 08:24