Monogram, Soffit installation, Dimensions and specifications (in inches) – GE MONOGRAM ZV370YSS--30" User Manual

Page 4: Wall mount installation ceiling

Advertising
background image

For answers to your Monogram,

®

GE Profile

Performance Series,

GE Profile,

GE,

Hotpoint and RCA appliance questions, call
GE Answer Center

®

service, 800.626.2000.

R

Listed by
Underwriters
Laboratories

Monogram.

Created 1/98

ZV370YSS—30" Professional Vent Hood

Dimensions and Specifications (in inches)

Soffit Installation:
• Drill 3/16" pilot holes through the shims and into the

soffit studs.

• Hold the hood against the soffit and secure with six lag

screws with washers.

• For additional support and to minimize vibration during

operation, we recommend that the hood be secured to
the back wall.

• Drive lag screws through the rear panel of the hood

and into the wall studs.

Wall Mount Installation:
• Drill 3/16" pilot holes, approximately 1-1/2" deep, in

all mounting screw locations.

• Hold the hood in position and drive lag screws in top

left and right mounting holes.

Note: 5/16" hanger bolts can be used in the two top
locations. Place the hood onto the hanger bolts and
secure with nuts and washers.

• Install lag screws with washers in remaining

mounting holes.

Installation Information:
Before installing, consult installation instructions
(Pub. No. 49-8816) packed with product for current
dimensional data.

SOFFIT INSTALLATION

WALL MOUNT INSTALLATION

Ceiling

5-1/2"

5-1/2"

11-7/16"

12"

Junction

Box

30" Hood Top View - Front Side

7"

29-7/8"

Back Side

11-7/16"

4-1/4"

3/4"

3"

3"

2-7/8"

3-1/8"

2-1/2"

12-7/16"

12-7/16"

8-15/16”

8-15/16”

CL

6" or 12"

Duct

Cover

Ceiling Drywall

30" Hood Rear View

18"

Mounting

Screw

Holes

6-1/2"

2-1/2"

6-1/2"

6”

6”

29-7/8”

Advertising