New weld-pro welder generator set, Heavy duty, long life gen-pro generators – Gillette PORTABLE GENERATORS User Manual

Page 5

Advertising
background image

10

OVER-HEAD VALVE

engine gives you 20% smaller and lighter weight,

than less efficient side valve engines. OHV design also reduces fuel and
oil consumption by 40%, gives you up to 10% more torque, has internal bal-
ancing for smooth operation and eliminates the need to constantly de-car-
bon engine cylinder head.

11

CAST IRON CYLINDER SLEEVE

gives you longer engine life than stan-

dard side valve aluminum engines.

12

AUTOMATIC OIL SENSOR

protects your engine from low oil and auto-

matically stops engine before damage happens.

13

SOLID STATE IGNITION

allows trouble-free operation with no points or

condenser to replace.

14

2-ELEMENT HEAVY-DUTY AIR CLEANER

adds major additional

engine life by trapping more dust and dirt.

15

ROPE-RECOIL STARTING

is easy and simple with its unique automat-

ic compression release.

16

EXTENDED RUN 4 GALLON

fuel tank with filter, valve and fuel gauge,

allows up to 12 hours continuous run on 3 kw to 7.5 kw sets.

17

EXTENDED RUN 8 GALLON

fuel tank with filter, and fuel gauge, allows

up to 9 hours continuous run on 9 kw to 15 kw sets.

18

COBALT EXHAUST VALVE AND SEAT

adds major additional service

life hours. (Vanguard and Kohler)

19

SEPARATE SPIN-ON OIL FILTER

and full pressure oil lubrication for

longer life. (9-15 kw)

20

BUILT-IN 2 WHEEL DOLLY

with new, full pneumatic 10” tires for easy

transport of larger 9-15 kw gasoline gen-sets.

180 amp DC weld capacity at 100% duty cycle.

6000 watts maximum power, 5500 watts continuous AC
power for additional job-site work.

Rugged Honda 13 hp electric start gasoline engine for

dependable, quiet operation.

Control panel: Hourmeter, (4) GFCI protected 120 volt

receptacles, load circuit breakers, welding rheostat knob, (1)

240 volt receptacle, and high temp shut down indicator light.

Unique WELD-PRO features: Convenient elec-

trode decal positioned on control panel for fast “stick” selection to

match the welding job; solid state control board for near-perfect

weld control; separate cooling fan for longer component life;
high

temperature shut-down and low oil shut-down pro-

tection.

Ask your dealer for complete WELD-PRO specifications.

FOR THOSE WHO WANT AND NEED THE VERY BEST,

GEN-PRO GENERATORS

GIVE

YOU AN ALL USA MADE, HEAVY DUTY GENERATOR WITH QUALITY FEATURES.

1

EXCLUSIVE “KLEEN-POWER”

design allows

only 7% harmonic distortion of the power sine-wave.
Harmful harmonic distortions over 10% may do damage
to your plugged-in electric load.

2 EXCLUSIVE “POWER-ASSIST”™

design allows

27% more copper wire and electrical grade steel than
leading competitor gen-sets. This gives you huge, extra
starting power for hard starting electric motor loads.

3 EXCLUSIVE, HEAVY-DUTY DIODES

give you “Life-

Time” warranty from failure on the most commonly
replaced part on other generator sets.

4 EXCLUSIVE, HEAVY-DUTY CAPACITOR

gives you

“Life-Time” warranty from failure on the second most com-
monly replaced part on other gen-sets.

5 EXCLUSIVE, AUTOMATIC LOAD BALANCE

elimi-

nates load chatter and excessive vibration due to unbal-
anced electric loads.

6 “MAGNETIC” CIRCUIT BREAKERS

automatically pro-

tect windings from overloads and “short circuited” electric
loads.

7 GROUND FAULT CIRCUIT INTERRUPTERS

(GFCI)

receptacle helps protect operator from electric shock and
provides OSHA/NEC compliance on the construction job-
site.

8 VOLTMETER

allows easy review of correct voltage out-

put.

9 RUN TIME METER

totals the hours of run time for serv-

ice or rental use.

GILLETTE MFG. INC., 1340 WADE DRIVE, ELKHART, INDIANA, 46514

TELEPHONE: (574) 264-9639 FAX: (574) 262-1840

HEAVY DUTY, LONG LIFE GEN-PRO GENERATORS

Model WP-180EH

= EXCLUSIVE ONLY WITH GEN-PRO GENERATORS

FEATURES AND BENEFITS

NEW WELD-PRO WELDER GENERATOR SET

Advertising