GE VG4061 - Manual (Page 28)

26
RECORDING
Program 1 (One time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 10/24/97 Fri
Tape Speed SLP
1=SP 2=SLP
Press CLEAR to correct
Press MENU to save
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Language
0 Exit
VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.
6. Review the information to make sure it is correct, and then
press MENU to save.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
0 Exit
VCR+ Channel My Channel
5 46
4 --
3 -> -> -> 23
2 --
1 --
Use CH+/- to select
Press 0-9 to change
Press MENU to save
Timer Recording with VCR Plus+
You can use VCR Plus+ to simplify timer programming if you have
cable TV and don’t receive all channels through a cable box or if
you get your TV signal off-air.
Setting Up the Channel List
If you did not set up the VCR Plus+ channel list, you can
do it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR Plus+ Channel List screen.
3. Go to Setting Up Your VCR if you need more information on
setting up your VCR Plus+ Channel List.
Using VCR Plus+
1. Press MENU to bring up the VCR MAIN MENU.
VCR PLUS+
Enter pluscode number
(from TV listing)
-
Press MENU to cancel
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Language
0 Exit
2. Press 1 to display the VCR PLUS+ menu.