Gateway DC-T60 - Manual (Page 17)

13
Turning on your camera
To turn on your camera:
■ Press and hold the Power button on the top of your camera for
about one second. The LED momentarily turns green, then
orange, then the LED turns off when the camera turns on.
To turn off your camera:
■ Press and release the Power button on the top of your camera.
Tips & Tricks To prevent valuable data from being accidentally
erased, slide the write protect tab (on the side of
the SD memory card) to “LOCK.”
Slide the lock back to the write-protect off position
to add, edit, or erase files on the SD memory card.
Tips & Tricks After you turn the camera on, it may take several
seconds to charge the flash. The viewfinder LED
is green, then orange while the camera is charging
the flash. When the LED turns off, the camera is
ready to take pictures.
Tips & Tricks The camera power automatically turns off when the
camera has not been used for a fixed period of time.
To continue using the camera, turn the camera on
again. For more information about changing the
Auto Off time setting in the Setup menu’s Basic tab,
see “Auto Off” on page 61.
Slide
tab to
lock