Genie GS-2668 DC - Manual (Page 24)

22 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750
Operator's Manual Third Edition • Third Printing
Operation From Platform
1 Turn the key switch to platform control.
2 Pull out the ground and platform red Emergency
Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
To Position Platform
1 Press the lift function select button.
2 Press and hold the function enable switch on the
control handle.
3 Move the control handle according to the
markings on the control panel.
To Steer
1 Press and hold the function enable switch on the
control handle.
2 Turn the steer wheels with the thumb rocker
switch located on the top of the control handle.
To Drive
1 Press and hold the function enable switch.
2 Increase speed: Slowly move the control handle
off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.
Machine travel speed is restricted when the
platform is raised.
Battery condition will affect machine performance.
When the battery charge indicator light flashes, the
machine drive speed is limited and the lift function
is disabled.
Auxiliary Lowering
Machines equipped with a separate
auxiliary lowering button next to the
ground control panel:
1 Turn the key switch to ground
control.
2 Pull out the ground red Emergency Stop button
to the on position.
3 Push and hold the auxiliary lowering button.
Machines not equipped with a separate auxiliary
lowering button:
1 Turn the key switch to ground control.
2 Pull out the ground red Emergency Stop button
to the on position.
3 Push and hold the function enable
button.
4 Activate the platform down function.
Operation From Ground
1 Turn the key switch to ground control.
2 Pull out both ground and platform red
Emergency Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
To Position Platform
1 Push and hold the function enable button.
2 Activate the platform up or the platform down
function.
Drive and steer functions are not available from the
ground controls.
OPERATING INSTRUCTIONS