GIGABYTE GN-WP01GT - Manual (Page 35)

Super G Wireless PCI Adapter
35
associate, click Preferred APs. The Preferred Access Points window appears
Figure 29 – Specify MAC Access Points
Leave the Access Point 1 through Access Point 4 fields blank or enter the
MAC addresses of up to four preferred access points to which the client
adapter can associate; then click OK. (The MAC address should consist of
12 hexadecimal characters.) If the specified access points are not found or
the client adapter roams out of range, the adapter may associate to another
access point.
Go to the next section to set additional parameters or click OK to save your
changes and return to the Profile Management window.
Diagnostics Tab
Basic transmit and receive statistics are available here (Figure 30), with more
advanced statistics available from the Advanced Statistics button.