3 airplane use, 2 storing latch – Graco Car Seat/Booster User Manual

Page 32

Advertising
background image

32

8.3 Airplane Use

This restraint is certified for use in Motor Vehicles. It is
certified for use in Aircraft ONLY when used with the
built-in harness. When used as a booster without
the harness, this restraint is NOT certified for use
in aircraft because there is no shoulder belt available.

Important points to remember:

1. Airlines have some restrictions about the use of

car seats.

2. Install your car seat on an airplane in the same way

it is installed in an automobile with a lap belt (see
Section 6.2, Securing the Car Seat in Your Vehicle,
pp. 22-23).

3. Check that the airplane seat belt holds the car seat

securely in place at all times.

8.2 Storing LATCH

1. For ease of storing,

extend LATCH to its
maximum length.

2. Locate the storage

bars on back of car
seat

™

.

3. Fasten ends of LATCH

onto storage bars as
shown.

4. After fastening onto

storage bar, pull on
adjustment belt to
make sure LATCH is
securely fastened.

5. LATCH storage

should look like this
when complete

™

.

™

Storage bars

Advertising