Standard engine & safety features, Home standby – 1 8kw, Home standby control features – Generac Power Systems QUIET TEST 5418 User Manual

Page 4

Advertising
background image

Home Standby – 1

8kW

GENERAC

®

POWER SYSTEMS, INC. • P.O. BOX 8 • WAUKESHA, WI 53187

262/544-4811 • FA X 262/544-4851

© 2007 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice.

Bulletin 0174200SBY / Printed in USA 04.07

STANDARD ENGINE & SAFETY FEATURES

High Temperature Automatic Shutdown

Vibration Isolation of Unit to Mounting Base

Low Oil Pressure Automatic Shutdown

12 Volt, Solenoid-Activated Starter Motor

Overspeed Automatic Shutdown (Solid-state)

Air Cleaner

Crank Limiter (Solid-state)

Fan Guard

Oil Drain Extension

Control Console

Rubber-Booted Engine Electrical Connections

Muffler Guard

Fuel Lockoff Solenoid

Flexible Fuel Lines

Secondary Fuel Regulator (N.G. and L.P.)

Critical Exhaust Silencer

Battery Charge Alternator

Battery Trickle Charger

Battery Cables

Main Line Circuit Breaker

Battery Tray

Weather Protective Enclosure (Locking Type)

HOME STANDBY CONTROL FEATURES

Home Standby Control Console

Manual/Auto/Off switch

Fault indicator lamps

Fuse (panel overload)

Set exercise time switch

Home Standby Microprocessor
Controls

Automatic voltage regulation

Utility voltage sensing

Utility interrupt delay

(10-second

setpoint)

Engine warm-up

(10-second

setpoint)

Engine cool-down

(1-minute

setpoint)

Seven-day exerciser

Design and specifications subject to change without notice. Dimensions shown are approximate. Contact your Generac dealer for certified drawings. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.

18 kW UNIT WEIGHT: 451 lbs.

Advertising