Connecting and operating the dvi booster – Gefen DVI BOOSTER EXT-DVI-141B User Manual
Page 8
5
5
CONNECTING AND OPERATING THE DVI BOOSTER
How to Connect the DVI Booster
1.
Connect the long DVI cable from the source into the “DVI In” on the front of the DVI Booster. The
DVI Booster is placed next to your display to regenerate the DVI cable.
2.
Connect a short DVI cable from the “DVI Out” connection in the back of the DVI Booster to your
display or projector.
3.
If there is no video signal or there is signal noise in the picture, adjust the EQ Trim Pot located
underneath the DVI Booster using a small fl at head screw driver.
How to Connect the DVI Booster
1.
Connect the long DVI cable from the source into the “DVI In” on the front of the DVI Booster. The
DVI Booster is placed next to your display to regenerate the DVI cable.
2.
Connect a short DVI cable from the “DVI Out” connection in the back of the DVI Booster to your
display or projector.
3.
If there is no video signal or there is signal noise in the picture, adjust the EQ Trim Pot located
underneath the DVI Booster using a small fl at head screw driver.
CONNECTING AND OPERATING THE DVI BOOSTER