Gianni Industries DG-11 (Mount) - Manual

The Digital Keyless Entry System (5 digit)
Operation User's Manual
DG-11
(Mount)
DG-12
(Mount/ANSI size)
DG-10
(Surface Mount)
ANSI Box
I. Features:
‹ 5 digit codes
‹ Door Reed Switch Input for Anti-Trailing
‹ 10 user PINs
‹ Fully Programmable via keypad and master code
‹ Non-Volatile Memory
‹ Invalid PIN Lock-out
II. Specifications:
‹ Operating Voltage: 9~14 Vdc
‹ Current Draw: Average 30mA, Peak 80mA @ 12Vdc
‹ Input: One request-to-exit, and time out reed switch
‹ Relays: N.O./N.C./Com. Output (free voltage contact), 3A@ 125Vac or 30Vdc
‹ Case Material: ABS （UL94V0）
‹ Operating Temperature:-20~+70℃
‹ Ambient Humidity:0~95% relative humidity non-condensing
‹ Visual Signals:
„ Green: Power on
„ Red: Relay activated
„ Yellow: Program Mode、Lock-out
‹ Factory Master Code: 12345
‹ Invalid PIN Lockout: System will shut down 60 seconds while 6 times of incorrectly
password attempted.
‹ Relay Activation Time: （＊20）
„
Pulse mode：1~99 seconds（01~99）
„ Latching mode（00）
‹ EPROM: Non-volatile memory, System will retain all programs and codes after a total
loss of power.
‹ User PINs: （＊ 01~＊10）It is possible to program 10 different user PIN codes.
Copyright Gianni Industries, Inc. All Rights Reserved.
P-MU-DG10-5C Ver. B Publish:2009.06.15 Page: 1/ 3