Geemarc Dallas 30 - Manual (Page 17)

Dialling a Number in One-Touch Memory
In the on-hook position either lift the handset or press

to get a dial
tone
Select one of the desired memory keys, M1 to M3
The telephone number will be dialled automatically
To end the call simply replace the handset in the cradle or press

Editing a Number in One-Touch Memory
In the on-hook position press one of the memory keys, M1 to M3.
The name and number stored will be displayed on the LCD display
Press the same memory button once again for 3 seconds. The first
digit will start flashing
Use the button and the dial keypad to edit the number.

or

can be used to move to a specific digit
Press the same memory button once again. The first character of the
name will start flashing.
Use the button and the dial keypad to edit the name.

or

can be used to move to a specific character
Press the same memory button once again. The modified name and
number will be stored
No display
 Make sure that the power adaptor is plugged in correctly and is not
damaged
 Make sure the batteries are inserted correctly

Make sure that the batteries are fully charged
Dallas 30 does not ring

Make sure that the telephone line cord is plugged in correctly and
is not damaged
 Connect another telephone to the telephone PTT socket or move
your telephone to another socket to track if the failure is coming
from your telephone or your PTT socket
 There may be too many communication devices connected to a
single telephone line e.g. another telephone, modem or facsimile
machine. Contact your network provider for help in calculating the
limit for your home or business line
No dial tone
 Make sure that the telephone line cord is plugged in correctly and
is not damaged
 Connect another telephone to the telephone PTT socket or move
your telephone to another socket to track if the failure is coming
from your telephone or your PTT socket

There may be too many communication devices connected to a
single telephone line e.g. another telephone, modem or facsimile
machine. Contact your network provider for help in calculating the
limit for your home or business line
No number is displayed when the telephone rings:

Please contact your telephone network provider to obtain the
caller display service or ensure that it has been activated if you
have subscribed already
 Even if you have subscribed to caller display, if the caller does not
want to show their number (private number), the display will show
PRIVATE CALL or -----PPPP-----

It could be a call from a PBX. Caller display may not work
properly if the telephone is connected to a PBX
No response on LCD display
 If you have experienced a power failure the batteries may become
weak. If the power is restored and the LCD display still does not
respond then replace the batteries with new ones.
TROUBLESHOOTING
28 31
MEMORY
32