Genie S-85 - Manual (Page 28)

26 Genie S-80 & Genie S-85 Part No. 43650
Operator's Manual Second Edition· Fifth Printing
OPERATING INSTRUCTIONS
Generator
To operate generator, move the generator toggle
switch to the generator position. The engine will
continue to run but no drive or platform functions
will operate.
Plug power tool into the power to platform GFCI
outlet.
To resume machine functions, move generator
toggle switch to machine functions position. All
functions will operate.
Engine Idle Select (rpm)
Select engine idle
(rpm) using the
symbols on the control
panel.
· Rabbit and foot switch symbol:
foot switch activated high idle
· Turtle symbol: low idle
· Rabbit symbol: high idle
Check Engine Light (if
equipped)
Light on and engine stopped: Tag the machine and
remove from service.
Light on and engine still running: Contact service
personnel within 24 hours.
Stopping the Engine
Push in the red Emergency Stop button and turn
the key switch to the
OFF position.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Retract and lower the boom to the stowed
position.
3 Rotate the turntable so that the boom is between
the non-steering wheels.
4 Turn the key switch to the OFF position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.