Globalsat Technology BTA-806 - Manual (Page 5)

BTA-806 User Manual page 5 of 8
5. Connecting device
Find Remote Devices
To set up a Bluetooth connection, the remote device must be found first. There are 3 ways to find
remote devices in BlueSoleil.
Inquire Device
1. Single-click the red ball in the main window to start inquiry.
2. Bluetooth devices within the radio range will be shown around the center ball.
3. Wait for a few seconds until the names of all the devices are obtained.
Connect and Disconnect
Connect
1. Select a remote device and double click it to browse its services.
Bluetooth passkey may be asked if security level of either side is set to high and they are not
paired devices.
After service browsing, the services the remote device supports are highlighted by changing
the color of the service buttons on the top of the main window.
2. Single click one of the service button to connect.
After connection is setup, the remote device and the service button will turn green.
Note: Users can right click the remote device icon or the service button to pop up operation menu
for connection.
Disconnect
Method 1: Select the remote device, right click the service button. On the popup menu, select
Disconnect.
Method 2: Right click the device icon. On the pop-up menu, select Disconnect | (the connection
you want to disconnect).
Method 3: For FTP and Synchronization connection, close the operation window, the connection
will be disconnected.
Method 4: Disconnect from the remote device directly.
Method 5: If the local Bluetooth device is removed or the remote device is powered off, all the
connections will be disconnected. If the remote device moves out of the radio range, all
the connections with the remote device will be disconnected in 1 minute.
Pair / Un-pair Devices
Once a remote device has paired with your computer by exchanging passkeys, passkeys will no
longer be required for further connections between your computer and the device.
How to pair with another device
• Automatically
If a passkey is required for connection, the devices will be paired automatically the first time
they successfully exchange passkeys and connect. After a device has successfully paired