Grizzly G3620 - Manual (Page 11)

24" & 27" Resaw Bandsaws -9-
Piece Inventory
After all the parts have been removed from the
carton, you should have:
• Bandsaw Unit with Blade
• Table with Rail Attached
• Dust Port
• Fence
• Miter Gauge (G3619/G3620 only)
• Hardware Bag
(1) Allen Wrench 6mm
(1) Open-End Wrench 12/14 mm
(1) Open-End Wrench 21/23 mm
(1) Phillips Screwdriver
In the event that any non-proprietary parts are
missing (e.g. nuts or washers), we would be glad
to replace them, or for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
Unpacking
The 24" and 27" Resaw Bandsaws are shipped
from the manufacturer in a carefully packed crate.
If you discover the machine is damaged after you
have signed for delivery,
please call Customer
Service immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
The 24" and 27" Resaw
Bandsaws are heavy
machines. DO NOT
over-exert yourself
while unpacking or
moving your machine –
you will need assis-
tance and power equip-
ment. Serious personal
injury may occur if safe
moving methods are not
followed.