Sending a fax from the control panel, Other ways to dial a fax number – Epson WorkForce 630 User Manual

Page 21

Advertising
background image

Sending a Fax From the Control Panel

21

Sending a Fax From the Control Panel

You can send a fax by manually entering a fax number, as described below.

Note:
To dial the number using a telephone, by redialing, or by selecting from your speed dial
list, see the next section. To send a fax from your computer using the Epson FAX Utility,
see your online User’s Guide.

1. Press the

Fax

button.

2. Place your original(s) for faxing (see page 8).

Note:
To scan a two-sided document (WorkForce 635 only), press the

2-Sided button

and select On.

3. Use the numeric keypad to enter the fax number. You can enter up to 64

digits.

4. To change fax settings, press x

Menu

and select settings as necessary.

5. Press the

B&W

or

Color x Start

button to send your fax.

Note:
If the recipient’s fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.

If you are scanning with the Automatic Document Feeder, your
document is automatically scanned and faxed.

If you place your document on the scanner glass, you can scan additional
pages after the first one is sent.

If the fax number is busy, you see a redialing message and the product
redials after one minute. To redial immediately, press

Redial/Pause

.

To cancel faxing, press y

Stop

at any time.

Other Ways to Dial a Fax Number

Here are some other ways you can dial a fax number:

Redial/Pause

: Redial the last fax number you used.

Speed Dial

: Select or type the number of the speed dial entry and press

OK

.

To use a group dial entry, press the

Speed Dial

button twice.

Advertising
This manual is related to the following products: