Gianni Industries DG-5 - Manual

GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-DG-5 Ver. D Published on 2008.05.05
The products are manufactured under an ISO
9 0 0 1
Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Statement
Features
Warranty
Specifications
Unit: mm
4 digit codes
5 digit codes available by special order
Tamper Switch Included
Door Reed Switch Input for Anti-Trailing
10 user PINs
Fully Programmable via keypad and master code
Non-Volatile Memory
Invalid PIN Lock-out
Cost effective
（ ）
The DG-5 is a digital code-operated (anti-
tamper ) for indoor access control keypad with up
to 10 individual user PINs, suitable for small and
m e d i u m - s i z e
b u s i n e s s e s , m u l t i - t e n a n t
residential and commercial buildings, as well as
clinics and health facilities.
The door reed switch is used to time out the timer when
door is moved. User access PINs ensure that all functions
Operating Voltage: 9~14 VDC
Current Draw: Average 20mA, Peak 70mA @ 12Vdc
Input: One request-to-exit, and time out reed switch
Relays: N.O./N.C./Com. Output (free voltage
contact), 3A@ 125Vac or 30Vdc
Case Material: ABS (UL94V0)
Operating Temperature: -20~+70C
Ambient Humidity: 0~95% relative humidity non-
condensing
Visual Signals:
Green: Power on
Red: Relay activated
Yellow: Program Mode
Lock-out
Factory Master Code: 1234
Invalid PIN Lockout: System will shut down 60
seconds while 6 times of incorrectly password
attempted.
Relay Activation Time:( *20
Pulse mode 1~99 seconds (01~99)
Latching mode (00)
EPROM: Non-volatile memory, System will retain
all programs and codes after a total loss of power.
User PINs:
01~ 10 It is possible to program
10 different user PIN codes.
、
)
：
（＊ ＊ ）
35.5
70
127.5
1
2
3
4
5
6
7
8
9
0
*
#
DG-5
Digital Keyless Entry System
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw