Removing an expansion card – Gateway ALR 7200 User Manual
Page 67
Advertising
Installing Components 55
Removing an expansion card
Removing an expansion card may require you to run software to
reconfigure the system.
1.
Turn off the system and disconnect all power cords and peripheral
devices.
2.
Open the case (“Opening the system” on page 3), observing the static
electricity precautions in “Static electricity precautions” on page 2.
3.
If necessary, disconnect any cables connected to the expansion card.
4.
Remove the screw that secures the card and its bracket to the back
panel of the server (see Figure 34).
Figure 34: Removing the Expansion Card Screw
To remove an expansion card
4077.boo Page 55 Thursday, January 21, 1999 9:48 AM
Advertising