Great Dane Scamper HG GDB10028 - Manual (Page 37)

Assembly - 34
ASSEMBLY
steering/reverse control grips and observe drive wheel
rotation. The drive wheels should rotate in the correct
direction.
5. Squeeze the steering reverse control grips to the
reverse position and observe drive wheel rotation. The
drive wheels should rotate in the correct direction.
6. Move PTO clutch switch to on position; mower clutch
should engage. Run blades for several minutes.
7. Move PTO clutch switch to off position and shut the
engine off.
8. Check all belts for proper tension.
9. Start the engine and test drive the machine in an open
area. Drive the machine forward; if the machine drifts to the
right or left, adjust the transmission control linkage.