Grizzly Jack Stands G8717 - Manual

MODEL
G8714/G8715/
G8716/G8717
JACK STANDS
INSTRUCTION SHEET
To reduce the risk of property damage,
serious personal injury, or death when
using these jack stands, take the following
precautions:
• Do not overload these jack stands
beyond their maximum rating. The
maximum rated load is for a pair of
jack stands with an evenly distributed,
vertically applied load only.
• Use caution when entering a vehicle
supported by jack stands. Never allow
others to enter a supported vehicle
while anyone is working underneath.
• ONLY use this jack on a hard level
surface capable of sustaining the load
being supported.
• Only use the jack stands at appropriate
points on the vehicle that can safely
support the vehicle's weight.
• Always make sure that vehicle load
points are centered in the saddle and
that all four corners of the jack stand
are firmly on the ground.
• Always apply the parking brake, and
use wheel chocks against the tires to
prevent accidental rolling.
• Keep as much of your body as possible
out from underneath the vehicle when
placing or removing the stands.
• Never modify or alter these jack
stands.
• Never release the jack quickly so the
vehicle drops and slams onto the
wheels or jack stands.
• Never allow children to play with or near
jack stands while in use or in storage.
Specifications
Model: G8714 2-Ton Jack Stands
—Maximum Load: 4,000 lbs (1 Ton Each).
—Minimum Support Height: 10 1 ⁄
2
".
—Maximum Support Height: 16 1 ⁄
2
".
Model: G8715 3-Ton Jack Stands
—Maximum Load: 6,000 lbs (1 1 ⁄
2
Ton Each).
—Minimum Support Height: 11 3 ⁄
4
".
—Maximum Support Height: 16 3 ⁄
4
".
Model: G8716 4-Ton Jack Stands
—Maximum Load: 8,000 lbs (2 Tons Each).
—Minimum Support Height: 12 3 ⁄
4
".
—Maximum Support Height: 19".
Model: G8717 6-Ton Jack Stands
—Maximum Load: 12,000 lbs (3 Tons Each).
—Minimum Support Height: 12 3 ⁄
4
".
—Maximum Support Height: 19 3 ⁄
4
".
Setup
Insert the ratchet bar into the base and bend the
tab (
Figure 1) inward. The tab when bent in, per-
manently prevents the post from completely slid-
ing out from the base.
Figure 1. Lock tab.
Ratchet
Bar
Base