Gossen THERMAL GRAPHICS PRINTERS IPP 144 - 40 G - Manual (Page 24)

22
The menu
program
„Change
Parameters“
The menu program „Change Parameters“ can be called in
one of two ways:
Without prior printing of the current parameters:
Press both keys following
„ACTUAL PARAMETERS ? ...“.
With prior printing of the current parameters:
Press both keys following
„CHANGE PARAMETERS ?“.
Quitting
the menu
program
If there are no keys pressed over a period of approximately
2 minutes, the program is terminated automatically and
any modifications made are not saved.
Press „ENTER“ and „SELECT“ simultaneously
for approx. 4 seconds; the IPP 144 brings up
the first function which can be modified.
(see changing parameters)
The program is terminated by simultaneously
pressing „ENTER“ and „SELECT“
Following the printout
„END“
all modified functions are saved.