Gateway E-826R - Manual (Page 30)

Setup www.gateway.com
25
The front panel menu has the following options:
To configure the autoloader, you must make sure that the setup includes the
following:
■ SCSI ID(s). For the autoloader, there is a single SCSI ID.
■ Magazine(s).
■ Ethernet IP address (if you are not using DHCP).
■ SNMP server IP address only if SNMP is being used.
■ Time server IP address (or the time zone, date, and time, if configuring
manually)—only if a time server is being used.
■ Control mode.
■ Security option.
Setting the SCSI ID
Each SCSI device attached to a server or workstation must have a unique SCSI
ID. For the autoloader, you need one SCSI ID.
To set the SCSI ID:
1 If the Main menu is not already visible, press E NTER . The Main menu opens.
2 Click Configuration, then press E NTER . The Configuration submenu opens.
3 Scroll to SCSI ID, then press E NTER .