Garmin 5008 - Manual (Page 30)

2 GPSMAP ® 4000/5000 Series Owner’s Manual
Where To?
Where T
o?
To create a route using Auto Guidance (when using a preprogrammed BlueChart g2
Vision card):
1. From the Navigation chart, select your destination.
2. Select
Navigate To > Guide To . Your route is calculated.
NOtE: You can change the auto guidance path to a route by selecting the end of the path and selecting
Navigate to > Route to . The auto guidance path stays on the screen, allowing you to trace it while
creating a route.
To edit a route:
1. From the Home screen, select Information > User Data > Routes .
2. Select the route to edit.
3. Select
Review > Edit Route . You can edit the route name or edit the route turns.
To delete a route:
1. From the Home screen, select Information > User Data > Routes .
2. Select the route to edit.
3. Select
Review > Delete .
To bypass a waypoint on a route:
1. Create a route as previously described.
2. Select the waypoint that follows the waypoint you are bypassing.
3. Select
Navigate To > Go To (or Route To ).
Navigating with a Garmin Autopilot
When you start any type of navigation (Go To, Route To, Guide To, or Follow Track), if you are
connected to a compatible Garmin autopilot (such as a Garmin GHP ™ 10), you will be prompted to
engage the autopilot.