Power supply – Grundig World Receiver G2000A User Manual

Page 5

Advertising
background image

POWER SUPPLY

Batteries

Open the battery compartment and insert 3 alkaline
batteries of the type R6, UM 3 or AA.

Remove the batteries when they are exhausted or if they
are not going to be used for a long period of time.

Note: If the DC 4.5 V socket is in use, the battery supply
will switch off automatically.
Note on Environmental Protection
Do not throw exhausted batteries in the household refuse.
Hand over the old batteries to you deader or public
collecting when buying new ones.

Warning for weak batteries:
When the batteries run low, the sound volume declines

gradually. The indication

appears on the display.

Continued operations with low batteries cause the radio to
turn off automatically, other malfunctioning and losing
programmed time settings and preset radio stations. In this
case, remove the batteries and press a paper clip through
the RESET hole.

Readjust the time settings and the present radio stations.
To prevent that the radio is switched on accidentally, use
the LOCK-switch when packing the radio or putting it away.




AC Main Adapter (not included)
You can connect the set to the mains using
a mains adapter.
Only use a mains adapter, which supplies
4.5V DC with the negative pole at the
center pin of the plug.

Before connecting the mains adapter

Check that the mains voltage indicated on the type
plate of the adapter matches your local mains voltage.

If the mains adapter equipped with a voltage selector,
set this to the local voltage.

Connect the mains adapter to the DC 4.5V socket of
the set and to the wall socket.


Power failure

If the power supply is interrupted, the programmed time
settings and preset radio stations will be kept in the
memory for 10 min. or more.

If the AC power is disconnected from the 4.5 DC
socket, the batteries (if present) will take over the
supply.

Advertising