GE RM94926 - Manual (Page 2)

1
Thank you for purchasing the GE Universal Remote
Control. This product is designed to provide years of
service operating a wide variety of video and audio
equipment.
Please retain this guide for future reference.
Table of Contents
Install the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
Programming for TV . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Programming for VCR . . . . . . . . . . . . . . . . . . . . . . . . . .6
Programming For DVD . . . . . . . . . . . . . . . . . . . . . . . . .7
Programming For DBS System . . . . . . . . . . . . . . . . . . .8
Programming For Cable . . . . . . . . . . . . . . . . . . . . . . . .9
Programming For Audio . . . . . . . . . . . . . . . . . . . . . . .10
Programming For AUX . . . . . . . . . . . . . . . . . . . . . . . .11
Operating Audio Function . . . . . . . . . . . . . . . . . . .12-13
Sleep Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Menu Functions . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15
Programming With Code Search . . . . . . . . . . . . . . . .16
Identifying Codes For Your Remote . . . . . . . . . . .16-17
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Device Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-43
This Universal Remote Control is already programmed
for most GE, RCA and ProScan TVs, VCRs, DBS
Systems, DVD Players, and Audio/Video Receivers.
NOTE: For users of GE, RCA and ProScan DBS
Products, older DBS models require that the DISPLAY
Button on this remote be used to make program selec-
tions. Use the SELECT Button for making program
selections on newer GE, RCAand ProScan DBS models.
Battery Installation
Your Universal Remote Control requires 2 AAA alka-
line batteries.
To install the batteries:
1. Turn the remote over and push down on the cover
and slide it off.
2. Insert the batteries, matching the batteries to the (+)
mark inside the battery case.
3. Slide the battery cover back into place.
NOTE: Programmed codes will remain in memory for
a short period of time allowing for battery replacement.
If batteries have been dead for a prolonged period of
time, reprogramming may be required.
94926 Revised Size 2/25/02 4:13 PM Page 2