Garmin nuvi 760 - Manual (Page 3)


Step 1: Mount the nüvi
1. Flip the cradle open, toward the windshield.
2. Fit the bottom of your nüvi
into the cradle.
3. Tilt the nüvi back until it
snaps into place.
Your unit should turn on
automatically if it is in place
and your vehicle is running.
To remove the unit from the cradle, pull up the
release button on the back of the cradle and tilt
the unit towards you and remove it.
Step 2: Configure the nüvi
To turn on your nüvi, slide the Power key to
the left. Follow the on-screen instructions.
Step 3: Acquire Satellites
Go outdoors to an open area, out of garages, and
away from tall buildings. Stop your vehicle, and
turn on the nüvi. Acquiring satellite signals may
take a few minutes.
The
bars indicate GPS satellite
strength. When one bar is green, the nüvi has
acquired satellite signals. Now you can select a
destination and navigate to it.
Step 4: Use the nüvi
B A C
D
E F
G H I
A GPS satellite strength.
B Bluetooth ® technology status.
C Battery status.
D Current time; touch to change time
settings.
E Touch to find a destination.
F Touch to view the map.
G Touch to make a call when connected to
a compatible mobile phone.
H Touch to adjust the volume.
I Touch to use the tools such as media
players, settings, and Help.
WARNING: This product contains a non-user-replaceable lithium-ion battery. See the Important Safety and
Product Information guide in the product box for important battery safety information.