Gefen EXT-HD-CP-FM10 - Manual (Page 9)

5
1 Power Indicator (Sender module)
This LED will glow bright green when the Hi-Def source is supplying suffi cient
power to the Sender module. If the LED fl ashes green, then the source is
unable to power the Sender module. See page 7 for more information.
2 Fiber Optic Connector (Sender module)
Connect an SC-terminated fi ber optic cable from the Sender pigtail module to
the SC fi ber connector on the Receiver pigtail module.
3 HDMI Connector, male (Sender module)
Connect this end of the Sender pigtail module to the Hi-Def source.
4 Power Indicator (Receiver module)
This LED will glow bright green when one of the included 5V DC power supplies
is connected to the power receptacle on the Receiver module.
5 Fiber Optic Connector (Receiver module)
Connect the SC-terminated fi ber optic cable from the Sender pigtail module to
the SC fi ber connector on the Receiver pigtail module.
6 HDMI Connector, male (Receiver module)
Connect this end of the Receiver pigtail module to the HDTV display.
7 Power Receptacle (Sender / Receiver module)
Connect the included 5V DC power supply to this power receptacle. Both the
Sender and Receiver module have power receptacles. However, the Sender
module does not need to be externally powered unless the source does not
supply enough power through the HDMI connector.
CABLE DESCRIPTIONS