GE PROFILE JT952SK - Manual

Dimensions and Installation Information
For answers to your Monogram, ® GE Profile ™ or
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center ® service,
800.626.2000.
Dimension and installation information are shown in inches.
R
Listed by
Underwriters
Laboratories
Specification Created 1/05
220131
JT952SK
GE Profile ™ 30" Built-In Double Oven
Note: Cabinets installed adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating.
Electric wall ovens are not
approved for installation with a plug and receptacle. They must be
hard wired in accordance with installation instructions.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
KW Rating
240V 7.2
208V 5.4
Breaker Size
240V 40 Amps
208V 30 Amps
Cabinet 30"
A - Overlap of Oven Over Side Edges of Cutout 11/16"-3/4"
B - Overlap of Oven at Bottom of Cutout 1"
Oven
C - Overall Depth 23-1/2"
D - Overall Height 52-7/8"
E - Overall Width 29-3/4"
CL
(Must Support 275 LBS.)
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
18"
over centerline
of cabinet
21" minimum
Door Opening
Allowance
B
B
A
A
Cutout height
51-13/16" MIN.
51-15/16" MAX.
Minimum cutout
location 12"
from the floor.
Cutout
depth
23-1/2"
MIN
5
47" to
bottom of
junction
box
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
21
Cabinet
width 30"
C
E
D
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
Conduit
(48-1/2"
long)
Junction
box
location