Goldmund EIDOS 20DVD - Manual (Page 13)

GOLDMUND EIDOS 20DVD – CD/SACD/DVD Player- 13
9 SETTING THE DISPLAY SYSTEM
The default setting of this player is AUTO, and unless you notice that the picture is
distorted when playing some discs, you should leave it set to AUTO.
9.1 WATCHING NTSC ON A PAL TV/DISPLAY
Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz
(NTSC) and automatically switch vertical amplitude, resulting in a display without vertical
shrinkage.
If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs
because of picture roll. If the TV has a V-Hold control, adjust it until the picture stops rolling.
On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom
of the screen. This is not a malfunction; it is caused by the NTSC to PAL conversion.
Note
• You can perform this setup anytime by
selecting “Easy setting” in the Setup menu.