Description of symbols, Dear customer, Introduction – Global Machinery Company PEDG User Manual

Page 3: Environmental protection

Advertising
background image

3

Description of symbols

The rating plate on your tool may show symbols. These

represent important information about the product or

instructions on its use.

Wear hearing protection.

Wear eye protection.

Wear breathing protection.

Conforms to relevant standards for

electromagnetic compatibility.

Warning.

Read these instructions for use carefully.

Choke control

Start position (choke closed).
Run position (choke open).

Use at a distance of at least 15m from

other people.

Thrown objects and rotating line can

cause severe injury.
Warning. Do not put hands or feet under the

cover of the machine when it is running.

Warning. Rotating blades.

Explosive material.

Extremely hot surface. Do not touch a hot

muffler, gear box or cylinder, you may get

burned. These parts get extremely hot from

operation and remain hot for a short time after

the unit is turned off.

Dear Customer

If you require any help with your product, whether it

is a Warranty claim, spare part or user information,

please phone our Help Line for an immediate response.

Phone 1300 880 001 in Australia or 0800 445 721 in

New Zealand.

Introduction

Your new GMC power tool will more than satisfy your

expectations. It has been manufactured under stringent

GMC Quality Standards to meet superior performance

criteria.
You will find your new tool easy and safe to operate,

and, with proper care, it will give you many years of

dependable service.

CAUTION.

Carefully read through this entire Instruction

Manual before using your new GMC Power Tool. Take

special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make

your job faster and easier. Safety, performance, and

dependability have been given top priority in the

development of this tool, making it easy to maintain

and operate.

Environmental protection

Recycle unwanted materials instead of

disposing of them as waste. All tools, hoses

and packaging should be sorted, taken to

the local recycling centre and disposed of

in an environmentally safe way.

Advertising