Geemarc CL1100 - Manual (Page 5)

SETTING UP
4 -TIME BREAK RECALL SWITCH (300/100)
Check the Time Break Recall setting of your
CL1400. For the UK the Time Break Recall should
be set to 100 mS. It can be switched to 300 mS for
other locations or PBX’s.
9
SETTING UP
3 - DIALING TYPES AND GROUNDING
Switch ETR/PR/T is located on the upper side of
english type models. If you wish to connect your
CL1100 to a public UK/French switch-board (PBX),
move switch ETR/PR/T to position 3 (T). This will
ensure optimal compatibility of your phone with
most (99%) PBX.
Positions: 1 2 3
Position 1:
Pulse dialing. The R is grounded. This option can
be used only within the UK in very special cases.
Position 2:
Pulse dialing. The R is set according to the
determined adjustment (see «Time Break Recall
Setting for R Function» p.9).
Position 3:
Tone dialing. The R is set according to the
determined adjustment (see «Time Break Recall
Setting for R Function» p.9).
8
P T
ETR R
If you are using your CL1100 with a
hearing aid, set your hearing aid to
“T” position.