Problem solver – GE Monogram 30 Wall Oven User Manual

Page 25

Advertising
background image

The Problem Solver

Wall Oven

25

Questions?
Use this
problem
solver!

PROBLEM

POSSIBLE CAUSE

OVEN WILL NOT

•

A fuse in your home may be blown or the circuit breaker tripped.

WORK

•

The oven controls are not properly set.

•

The oven controls are set for cleaning. If necessary, allow the oven
to cool then open the door.

OVEN LIGHT(S)

•

The light bulb is loose or defective. Tighten or replace the bulb.

DO NOT WORK

•

The oven is self-cleaning or in a “TIMED” delay mode. The oven
lights do not come on during self-cleaning or during a “TIMED”
delay mode until the oven begins heating.

FOOD DOES NOT

•

The oven controls are improperly set. See the “How to set your

BAKE OR ROAST

•

oven for baking or roasting” section.

PROPERLY

•

Oven not preheated for a long enough time (use at least 15 minutes).

•

Incorrect cookware or cookware of improper size being used.
See the “How to set your oven for baking or roasting” section.

•

Shelves in the wrong position. See the “How to set the oven for
baking or roasting” section.

•

Use a foil tent to slow down browning during roasting.

FOOD DOES NOT

•

The oven controls are not set at BROIL. Turn both the oven control

BROIL PROPERLY

•

and oven temperature knob to BROIL.

•

Improper shelf position being used. See the Broiling Guide.

•

Food is being cooked in a hot pan.

•

Cookware is not suited for broiling. Use the broiling pan and grid
that came with your range.

•

Aluminum foil used on the broiling pan and grid has not been fitted
properly and slit as recommended.

•

In some areas the power (voltage) may be low. Preheat the broil
element for 10 minutes. Broil for the longest period of time
recommended in the Broiling Guide.

OVEN WILL NOT

•

The oven temperature is too high to set a self-clean operation.

SELF CLEAN

Allow the oven to cool to room temperature and reset the controls.

•

The controls are not properly set. Be sure the mode selector knob is
set in the TIMED position.

“CRACKING” OR

•

This is normal. This is the sound of the metal heating and cooling

“POPPING” SOUND

during both the cooking and cleaning functions.

DURING CLEANING

EXCESSIVE SMOKING

•

Excessive soil. Turn the oven control knobs to OFF. Open the

OCCURS DURING

•

windows to rid the room of smoke. Wait until the locked door

CLEANING

•

indicator light goes off. Wipe up excess soil and reset the clean cycle.

OVEN NOT CLEAN

•

The oven was heavily soiled. Clean up heavy spillovers before starting

AFTER A CLEAN

the clean cycle. Heavily soiled ovens may need to self-clean again.

CYCLE

•

Oven is connected to a 208V electrical supply. Set your cleaning
time for 4 hours.

•

The oven controls are not properly set. Be sure the mode selector
knob is set in the TIMED position. See the “Self-Cleaning” section.

If you need more help…call, toll free:
GE Answer Center

®

800.626.2000
consumer information service.

Advertising