GE VG4258 - Manual (Page 29)

27
Recording a Program
Recording While You’re Away (Timer Recording)
Checking or Clearing Timer Recordings
1. Press MENU on remote to display VCR MAIN
MENU
on TV screen.
2. Press 2 to display the TIMER RECORDINGS menu.
3. Press 2 for Review Existing Progs. feature.
4. Press MENU PROG to display the next program.
5. Press CLEAR when the program you want to erase
appears on the screen.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the
AUDIO
and VIDEO IN jacks of the VCR. Recording
from the line input is convenient if you have a satellite
receiver or similar component attached to these jacks.
To timer record from the component connected to the
VCRÕs line input:
Press INPUT to enter VIDEO instead of the channel
number on the TV screen during timer programming.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
Program 1 (One Time)
Channel 08 CABLE
Start Time 02:10 PM
End Time 03:35 PM
Start Date 08/04/96 Sun
Tape Speed SLP
Press CLEAR to erase
Press MENU for next prog
Program 1 (One Time)
Channel VIDEO
Start Time 02:10 PM
End Time 03:35 PM
Start Date 08/04/96 Sun
Tape Speed SLP
Press CLEAR to correct
Press MENU to save