GE 49-8830-1A - Manual (Page 32)

Operating Instr
uctions
Safety Instr
uctions
Car
e and Cleaning
Installation Instr
uctions
Tr
oubleshooting T
ips
32
Problem Solver…
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem Possible Causes What To Do
Oven door is crooked The door is out of position. • Because the oven door is removable, it sometimes gets
out of position during installation. To straighten the
door, push down on the high corner.
Oven makes This is the sound of the • This is normal.
clicking noise heating element turning
off and on during
cooking functions.
CLEAN light is on The oven door was • Turn the Oven Temperature knob to OFF. Allow
when you want to cook accidentally locked. the oven to cool. Never force the door latch handle.
“F—and a number” You have a function error code. • If a function error code appears during the self-
flash in the display cleaning cycle, check the oven door latch. The latch
may have been moved, even if only slightly, from the
locked position. Make sure the latch is moved to the
right as far as it will go. Turn the Oven Temperature
knob to OFF. Allow the oven to cool for one hour.
Put the oven back into operation.
• Disconnect all power to the range for 5 minutes
and then reconnect power. If the function error code
repeats, call for service.
Power outage Power outage or surge. • Some models will automatically resume their setting
once the power is restored. On models with a clock,
you must reset the clock. If the oven was in use, you
must reset it by turning the Oven Temperature knob
back to OFF, setting the clock and resetting any
cooking function.