Grizzly H3372 - Manual (Page 16)

H3372 3 HP Air Compressor -14 -
If the compressor is used on a daily
basis, perform the following checks
each week:
• Rinse the air filter foam element in
water.
• Check for loose bolts or fittings.
Weekly
Like all power tools, there is danger
associated with operating this
equipment. Accidents are frequently
caused by lack of familiarity or fail-
ure to pay attention. Use this tool
with respect and caution to lessen
the possibility of operator injury. If
normal safety precautions are over-
looked or ignored, serious personal
injury many occur.
After First 50
Hours Of Use
After the first 50 working hours or 30
days, whichever comes first, perform
the following maintenance:
• Replace the oil in the motor with com-
pressor oil (use ISO 100 of SAE 30W
viscosity, non detergent type).
• Make sure that all the fittings are tight.
• Remove the air filter foam element
shown in
Figure 14 and rinse it out
with water. Allow it to dry and re-
install.
Figure 14. Air filter foam element
• Blow out any accumulated dirt
between the cylinder cooling fins.
The Model H3372 3 HP Air
Compressors are specifically
designed for air tool operation. DO
NOT MODIFY AND/OR USE THIS
MACHINE FOR ANY OTHER PUR-
POSE. Modifications or improper
use of this tool will void the warran-
ty. If you are confused about any
aspect of this machine, DO NOT use
it until you have answered all your
questions. Serious personal injury
may occur.