Geemarc Dallas 10 - Manual (Page 7)

USING THE PHONE
Note : Numbers will be lost if you disconnect your
phone. Entering a new number in memory will
automatically erase the previous number.
8 - DIALLING STORED NUMBER
- Lift the handset and await the dial tone.
- Press appropriate direct memory button M1, M2,
or M3. The stored number will be dialled out
automatically.
Or press the MEM button followed by the keypad 0
to 9 button under which the desired number is
stored. The stored number will be dialled out
automatically.
To register your stored phones numbers, use the
index located on the base.