Graco 1000 STETM - Manual (Page 22)

ADDITIONAL INFORMATION
20
Vehicle may already be equipped with a tether
anchor (top strap anchor). See vehicle owner’s
manual for location.
If vehicle does not have a tether anchor, one
must be installed:
• Contact vehicle dealership for proper
anchor location and installation.
• Before installing anchor, install car seat on
a vehicle seat and check that the lap belt
portion of the vehicle belt will hold car seat
securely. If not, move car seat to another
seating position.
❃
Installation of Anchor Hardware
Anchor Hardware
Bolt
Washers (2)
Nut
Anchor Ring
Lock Washer
Avoid serious injury or death:
• Be sure anchor hole is properly sealed
to prevent exhaust fumes and water
from entering the vehicle.
• If you wish to remove anchor once child
outgrows car seat, make sure hole is
properly plugged or sealed to prevent
exhaust fumes from entering the
vehicle.
WARNING