Symbols on the machine, Specifications – Global Machinery Company PCH25 User Manual
Page 4
4
A log lying on the ground
Cutting the limbs of Fallen Tree
1
2
Pruning of Standard Tree
1
2
Felling a tree
Felling
direction
Notch
cut
Felling
cut
1
2
A log hanging off the ground
1
2
1
2
A log lying on the ground
Cutting the limbs of Fallen Tree
1
2
Pruning of Standard Tree
1
2
Felling a tree
Felling
direction
Notch
cut
Felling
cut
1
2
A log hanging off the ground
1
2
1
2
1
2
1
2
1
2
1
2
Symbols on the machine
Fuel inlet.
(Position: under the fuel tank cap.)
Chain oil inlet.
(Position: next to the oil tank cap.)
On/Off.
(Position: on the on/off switch.)
Setting the on/off switch to Off, stops the engine
immediately.
Run position.
Start position (when engine is warm.)
Start position (when engine is cold.)
Choke control
(Position: next to knob on the filter cover)
High run adjustment screw.
Low run adjustment screw.
Idle adjustment screw.
(Position: left side of machine close to
pull start handle.)
Chain brake released (hollow arrow) and
activated (solid arrow.) (Position: right side
of machine, on chain drive cover.)
Specifications
Engine displacement:
25.4cc
Maximum engine power:
900W
Engine type:
Air cooled, single
cylinder, two-stroke cycle
Recommended maximum
engine speed at idling:
3200min
-1
Maximum engine speed
with cutting attachment:
11000min
-1
Fuel type:
Unleaded petrol/
2-stroke oil (35:1)
1 Litre of unleaded petrol:
28.5ml of oil
5 Litre of unleaded petrol:
145ml of oil
Fuel tank capacity:
230ml
Oil tank capacity:
160ml
Spark plug:
LD L8RTF NGK BM6A
Champion CJ8
Oil feeding system:
Automatic pump
Sprocket wheel:
6–teeth x 9.53mm
(3/8”) pitch
Guide bar type:
Sprocket nose
Chain bar length:
305mm (12”)
Chain type:
Chinese Chain
Chain pitch:
9.53mm (3/8”)
Weight (including
guide bar and chain):
3.85kg
Sound pressure level:
110 dB(A)
A log lying on the ground
Cutting the limbs of Fallen Tree
1
2
Pruning of Standard Tree
1
2
Felling a tree
Felling
direction
Notch
cut
Felling
cut
1
2
A log hanging off the ground
1
2
1
2
A log lying on the ground
Cutting the limbs of Fallen Tree
1
2
Pruning of Standard Tree
1
2
Felling a tree
Felling
direction
Notch
cut
Felling
cut
1
2
A log hanging off the ground
1
2
1
2
A log lying on the ground
Cutting the limbs of Fallen Tree
1
2
Pruning of Standard Tree
1
2
Felling a tree
Felling
direction
Notch
cut
Felling
cut
1
2
A log hanging off the ground
1
2
1
2