Global Machinery Company ST1800 - Manual (Page 5)

the tool. A part that is damaged should be properly
repaired or replaced by an authorised service facility,
unless otherwise indicated in this instruction manual.
Defective switches must be replaced by an authorised
service facility. Do not use a tool if the switch does
not turn the tool on and off correctly.
17. Guard against electric shock. Prevent body contact
with grounded objects such as water pipes, radiators,
cookers and refrigerator enclosures.
18. Use only approved parts. When servicing, use only
identical replacement parts. Use an authorised service
facility to fit replacement parts.
19. Warning. The use of any accessory or attachment
other than those recommended in this instruction
manual may present a risk of personal injury.
20. Have your tool repaired by a qualified person. This
electric tool is in accordance with the relevant safety
requirements. Repair should only be carried out by
qualified persons using original spare parts, otherwise
this may result in considerable danger to the user.
Additional safety rules for blower vacs
• Always wear adequate protective clothing when
operating the tool to avoid injuries to face, eyes, hands,
feet, head or hearing. Use safety glasses or a face
shield, high boots or sturdy shoes, long trousers, work
gloves, a hard hat and ear defenders.
• Do not start the tool when it is upside down or when it
is not in the operating position.
• Switch the motor off and remove the plug when the
tool is not being used, left unattended, being cleaned,
being moved from one place to another or when the
extension cord is entangled or damaged.
• Use only outdoor rated extension leads that are so
marked. Keep the extension cord away from heat, oil
and sharp edges.
• Do not operate the tool near people, especially children
or pets. Turn it off if they get too close. Maintain a safe
distance of at least 5m from other people when using
the tool.
• Never direct the blower tube towards bystanders or pets.
Never blow debris in the direction of bystanders or pets.
• Do not handle the plug or the tool with wet hands and
do not use the tool in the rain.
• Ensure that the extension lead is secured in a manner
that prevents it form disconnecting from the plug whilst
in use.
• Keep all the air intakes and the blower tube free of
dust, lint, hair and other material that may cause a
reduction in air flow.
• Keep a balanced and stable stance while using the tool.
• Do not switch on the tool in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gasses and
powders.
• Only operate the tool during broad daylight or with
adequate artificial light.
• When the tool is not in use, store it in a dry place and
out of reach of children.
• After use, disconnect the tool from the power supply
and check for damage. If you have the slightest doubts,
contact an authorised service centre.
• Only use the tool according to the instructions given in
this manual.
• Check regularly that the screws are tight.
• Use only spare parts and accessories recommended by
the manufacturer.
• Do not try to repair the tool or access internal parts.
Contact authorised service centres only.
• Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
tool when you are tired, sick or under the influence of
alcohol or other drugs.
• Do not operate this appliance with long loose hair or
5