GE ZET958 30 - Manual (Page 12)

12
Special Features
Wall Oven
Fahrenheit
or Celsius
temperature
selection
Your oven control is set to use the Fahrenheit
temperature selections, but you may change this
to use the Celsius selections.
1 Press the BAKE and BROIL HIGH/LOW
pads (on double oven models, use the upper
oven controls) at the same time for 3 seconds
until the display shows “SF.”
2 Press the BROIL HIGH/LOW and COOK
TIME
pads at the same time. The display will
show “F” (Fahrenheit).
Press the BROIL HIGH/LOW and COOK
TIME
pads again at the same time. This will
show “C” (Celsius).
3 Press the START pad. The new setting will be
displayed for both ovens.
NOTE: On double oven models, the new setting will
be displayed for both ovens.
Auto
Recipe
™
conversion
When using convection bake, the Auto Recipe ™
Conversion feature will automatically convert entered
regular baking temperatures to convection baking
temperatures.
Once the feature is activated, the display will show the
actual converted (reduced) temperature. For example,
if you enter a regular recipe temperature of 350°F and
press the START pad, the display will show “CON”
and the converted temperature of “325°F.”
NOTE: This feature does not convert convection bake
cooking times, only regular baking temperatures.
To Activate the Feature:
1
Press the BAKE and BROIL HIGH/LOW
pads (on double oven models, use the upper
oven controls) at the same time for 3
seconds, until the display shows “SF.”
2 Press the CONV BAKE/1 RACK pad. The
display will show “CON OFF.” Press the
CONV BAKE/1 RACK
pad again. The
display will show “CON ON.”
3 Press the START pad.
To deactivate the feature, repeat steps 1–3
above but press the START pad when “CON
OFF” is in the display.