Garmin VHF 725 - Manual (Page 31)

25
Accessories &
Installation
APPENDIX A
Standard Accessories & Replacement Components
(Included with the VHF 725)
Antenna......................................... Part Number: 700-00010-00
NiCad Battery Pack Kit
(Includes Battery Pack and Charger & Charging Stand .)
...................................................... Part Number: 010-10188-00
Alkaline Battery Tray
(Requires Six “AA” Alkaline Cells) .................................
........................................................ Part Number: 010-10214-00
Wrist Strap....................................... Part Number: 013-00027-00
Belt Clip........................................... Part Number: 145-00327-00
Belt Clip Mounting Screws............... Part Number: 211-54307-11
Cigarette Lighter Charging Cable Assy..................................................
..........................................................Part Number: 010-10190-00
Owner’s Manual............................. Part Number: 190-00179-00
Contact GARMIN Customer Service to obtain replacement parts.
Refer to Page 15 for Antenna and Battery Pack Installation.
Installing the Belt Clip and Wrist Strap
The VHF 725 is supplied with a
belt clip and carrying strap so you can
carry the unit wherever you go. Attach the
clip to the back of the unit using the two
mounting screws provided. To attach the
wrist strap, thread the cord portion of the
strap through the slot in the clip then
insert the solid end of the strap through
the loop formed by the cord, pulling it
through until snug. (Figure 13)
FIGURE 13
Mounting
Screws
Wrist
Strap
Belt Clip
Slot for
Wrist Strap
Back of
VHF 725
Cigarette Lighter Charging Cable Assembly
Charges the battery pack using a 12 volt power source.
Alkaline Battery Tray
Provides an alternate source of power.